+375 447 88-78-88

polymer.nikatec@gmail.com

Request quotation
Engineering-led side forms and tooling for precast production — casting bed, tilting tables, robotic lines and battery moulds. No welding, no anchors, no glue.
Formwork that holds itself to the casting bed
Send us a drawing →
See the range
The range
Three forming principles, one magnetic platform
The same 2700 kg system is built into the side forms and into the boxes, so holding force is predictable across everything you plan around it — from a casting bed of piles to a robotic pallet line.
Magnet boxes
NT-2700 and NT-1600. A fixing unit in its own right and the base for recess formers, brackets, brackets and your own elements.
Brackets
Plywood shuttering on horizontal surfaces, held by magnet boxes. Standard and reversible — turn it over to change the height.
Built to order
Opening formers, corbel formers, non-standard housings and forming elements made to your drawing.
Battery moulds
Stop-ends fix to the vertical shutter plate and form the panel edge over its full height, sealed on both sides.
Robotic lines
Side forms for pallet circulation lines, shuttered and deshuttered by robot. Same holding principle, different profile and gripping.
Horizontal forming
Side forms for casting beds, tilting tables and pallets. 3 m standard, up to 600 mm high, extended without new equipment.
What it replaces

One set instead of dozens of moulds

A base set of side forms plus add-ons — extensions, pile point formers, void formers, chamfer strips, calibrators — covers a product range that would otherwise need a dedicated steel mould for each product. Size is limited by the casting bed, not by the mould.

Slabs

Floor, balcony and infill slabs

Wall panels

Solid, sandwich and partition walls

Columns & beams

Cross-section 100–600 mm, square or rectangular

Lintels

Linear elements of any length within the casting bed

Driven piles

With and without points, plus pile helmets

Stair landings

Formed flat on the casting bed

Foundation blocks

Standard and non-standard sizes

Kerbstones

Repeatable contour, no dedicated mould

The magnetic system

One system, the whole range

A single neodymium magnetic system in a reinforced steel housing with stiffening ribs. The same system is built into the side forms, the stop-ends and the boxes — so holding force is one figure you plan around, not a variable.

Activation is mechanical, with a 10 mm stroke. Pressing the head presses the magnet to the steel casting bed and the form clamps; lifting it draws the magnet back and the form comes free. No power, no welding, no anchors — and nothing to re-drill when the layout changes.

Retaining force per system2,700 kg (26.5 kN)
ActivationMechanical, 10 mm stroke
HousingReinforced steel, stiffening ribs
SurfaceNo welds, no anchors, no damage
Standard length3 m
Side form heightup to 600 mm
Pile / column cross-section100–600 mm
Magnetic system — section through the casting bed CLAMPED
Press to release the magnet
Engineering

What the numbers are

The neodymium systems are what the whole range is planned around — one figure of holding force in the side forms, the stop-ends and the boxes.

2700kg

Retaining force per magnetic system, about 26.5 kN — the same system in the forms and the boxes.

85/120°C

Working temperature: standard, and optional for heated beds and accelerated curing.

~0.1% per yr

Loss of retaining force in the neodymium systems — service life is effectively unlimited.

600mm

Maximum side form height, raised over 50 mm steps by bolted heightening side forms.

How we work

From drawing to delivery

You send a drawing; we make a technical proposal with a layout, a bill of materials and a calculation for your element and your casting bed — before any commitment on either side.

01

Drawing or spec

The element you need to form, and your casting bed or mould type.

02

Technical proposal

Layout, bill of materials and calculation for your case..

03

Approval & order

Sign-off on the set and the terms.

04

Production

8–10 weeks from approval and advance.

05

Delivery

FCA Mogilev, Belarus (Incoterms 2020)

Production lead time
8–10 weeks from advance payment and drawing approval
Delivery term
FCA Mogilev, Belarus (Incoterms 2020)
Payment
70% on order, 30% on notice of readiness before dispatch
Warranty
12 months from delivery against manufacturing defects
Next step
Send us a drawing
Send a drawing or a short specification of the element you need to form, with the type and size of your casting bed or battery mould. You get a technical proposal in return.
Email
polymer.nikatec@gmail.com
Phone
+375 44 788-78-88
Web
nikaformwork.com
Nika Technology — magnetic formwork systems for precast production nikaformwork.com
Manage cookies
We use cookies to provide the best site experience.
Manage cookies
Cookie Settings
Cookies necessary for the correct operation of the site are always enabled.
Other cookies are configurable.
Essential cookies
Always On. These cookies are essential so that you can use the website and use its functions. They cannot be turned off. They're set in response to requests made by you, such as setting your privacy preferences, logging in or filling in forms.
Analytics cookies
Disabled
These cookies collect information to help us understand how our Websites are being used or how effective our marketing campaigns are, or to help us customise our Websites for you. See a list of the analytics cookies we use here.
Advertising cookies
Disabled
These cookies provide advertising companies with information about your online activity to help them deliver more relevant online advertising to you or to limit how many times you see an ad. This information may be shared with other advertising companies. See a list of the advertising cookies we use here.
Confirm